Hubbell M5100r9 100a 30y 120/208v Dockside Receptacle

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

100 Ampere, 125/250 Volt 3 Pole 4 Wire Ship-to-Shore Devices

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15° angle cast aluminum back box has corrosion resistant gray finish and top hub with 1½ in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15° angle non-metallic back box, made of high-grade engineered thermoplastic Valox to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 1½ in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Manufacturer Part Number: M5100R9

More Information
Special Shipping Message	Free Ground Shipping*
Manufacturer Part Number:	M5100R9

Features:

UL Type 4X, 12 and IP69k environmental ratings
Super tough insulated non-metallic housing
Self-closing gasketed cover
Sequential contact engagement to prevent a momentary over-voltage
Market leading UL witnessed HP ratings

Specifications:

Application: Marine wiring devices
EU RoHS Indicator: Yes
Item Type: Flanged Single
Material: Thermoplastic
Mounting Hardware: Screw mounting
Number of Poles: 4-Pole
Series: Corrosion resistant
Style: Standard service
Type: Watertight receptacle
Amperage Rating: 100A
Connectivity: Pressure terminal screws
Current Rating: 100A
Phase: Three Phase
Number of Wires: 5-Wire
Wire Size: #3 AWG to #1/0 AWG
Wattage: 48000W
Temperature Rating:
- Maximum Continuous: 75 °C
- Minimum Continuous: -40 °C without impact

Performance:

Electrical:
- Current Interrupting: Certified for current interrupting at full rated current
- Dielectric Voltage: Withstand 3000V AC
- Max. Working Voltage: 600V RMS
Environmental:
- Flammability: HB or better per UL 94 or CSA C22.2 No. 0.17
- Ingress Protection: IP67 Suitability
- Moisture Resistance: Watertight per IEC 60309-1
Mechanical:
- Impact Resistance: Per CSA C22.2 No. 182.1 / UL1682
- Product Identification: Ratings are a permanent part of the device housing
- Terminal Identification: Terminals identified in accordance with North American and IEC conventions

Certifications and Compliance:

CSA StandardC22.2 No. 182.1
UL Classified to IEC 60309-1 IEC 60309-2
UL Listed, File E146032
NEMA Rating: Non-NEMA

Installation Instructions

Dimensional Drawing

HUBBELL Marine Pin & Sleeve Receptacle, 4P5W, 100A 120/208V

Corrosion Resistant Devices that Withstand the Most Abusive Environments - Hubbell offers a superior grade of 100A IEC Pin and Sleeve designed for use in the most demanding environments. These devices feature nickel plated solid brass pins for long life and reliable electrical contact in the most corrosive environments. They have a high visibility yellow supertough nylon housing.

The heavy duty external cord clamps provide maximum cord retention to maintain secure terminations. The screws and fasteners are made from stainless steel.

Key Features

Insulated non-metallic housing
Self-closing gasketed cover
Color coded housings for easy identification

• Gray nylon dockside receptacle has gasketed, spring loaded cover
• Closes automatically when not in use and is watertight (IP67 - withstands temporary immersion) when securely fastened
• Mounting holes are 4-7/8" on center
• Mounting screws and gasket included
• Available back box enclosure for inlets and outlet/receptacles has 15° angle section which can be installed in any of 4 positions; see Related Products

Heavy on the technical side...

Why the Wye in 3-Phase Y (3ØY) Power*

Three-phase power allows utilities to deliver more power over smaller, less expensive wires.

Most homes are wired with single-phase power, which uses one AC voltage delivered over two hot wires and one neutral wire.
The voltage across the two hot wires measures 240V AC (for your oven, dryer, or A/C ), and across either hot to the neutral measures 120V AC (for everything else).

Most commercial businesses are wired with 3-phase power, which consists of three single-phase AC voltages separated from each other by 120 electrical degrees (a third of a cycle).
Three-phase power is commonly available in 208 volts and 480 volts (typically used by larger commercial facilities).
These systems deliver power over three hot wires, where the voltage across any two hot wires measures 208V AC or 480V AC.

There are two types of circuits used to maintain an equal load across the three hot wires in a 3-phase system — Delta and Wye, referring to the shape of the wiring diagrams describing them:
The Delta configuration shows the three phases connected like a triangle (the letter "Delta"), whereas the Wye (or "star") configuration shows all three loads connected at a central neutral point - so the wiring diagram looks like the letter "Y".

Delta 3-phase systems have four wires - three hot and one ground.
Wye 3-phase systems have five wires - three hot, one neutral and one ground.

While both Delta and Wye systems measure 208V or 480V AC (3-phase) between any two hot wires, Wye systems also measure 120V or 277V AC (single-phase) between any single hot wire and the neutral.
In other words, while Delta systems can only provide one voltage, the extra neutral wire of the Wye system allows for providing two different voltages, and the powering of both 3-phase and single-phase devices.
As examples, many commercial facilities run lighting on single phase 120 or 277 volt current, and larger HVAC loads on the higher 208 or 480 volt current, both available from the same Wye connected electrical service.

Delta is used in long distance power transmission because it’s expensive to run an extra neutral wire all those miles.
So power stations receive their power in a Delta configuration, but commonly distribute it to their customers in a Wye configuration.
That’s why power station distribution transformers are commonly wired as Delta → Wye.
The Wye configuration creates the neutral wire that allows customers to operate single- as well as 3-phase loads from the same electrical service.
Note that delta-wired devices, such as lar

Your cart

Your cart is empty

Order Summary

Adapters

Language

Country

Language

Country